Green Column Solar & Wind Powered Street Lighting  . Find out more here

Solar Panel Mounting Frames

UniRac

Configuration for any location

The SolarMount system is engineered for the maximum flexibility possible in planning, locating, and installing your PV array. On the roof or ground, SolarMount components assemble into structures that support a variety of PV array configurations.  Design for high profile or low, whichever suits your unique site. Never worry that it won't meet requirements.  We can provide you with whatever you want. Whether your plans call for a few modules on a pole, a roof-mounted grid-tied array, or a megawatt in a field, we have your PV mounting solution.

UniRac's products are carefully engineered and rigorously subjected to destructive testing. Their program of PE certification has earned the confidence of customers and facilitates a quicker, well documented inspection process.

Flush Mounted - High and Low Profile - For the roof or other mounting surface

PV modules can sit in high profile (rails parallel to rafters) or low profile (rails perpendicular to rafters). Top mounting clamps are the norm with this type of installation. If bottom mounting clips are selected, be sure to plan for access to secured L-feet during installation.

High Profile Tilt Legs - On the ground, flat roof, or pitched roof

High profile orientation maximized module density at your site. Tilt angle depends on leg length and rail length. Get sizing information from page 13 of the SolarMount Master Price List and Sizing Chart (1.3 MB). Use either top mounting clamps or bottom mounting clips. For module-to-rail sizing, see page 4 or 5. You can also download the installation manual for high profile tilt legs.

Low Profile Tilt Legs - On the ground, flat roof, or pitched roof

Low profile orientation minimizes the vertical height of your array. Hide it behind a parapet, for example. You can also optimize tilt angle on a pitched roof. Tilt angle depends on leg length and the make and model of your PV modules. Get sizing information from page 12 of the SolarMount Master Price List and Sizing Chart (1.3 MB). Use either top mounting clamps or bottom mounting clips. For module-to-rail sizing, see page 4 or 5. You can also download installation instructions for low profile tilt legs.

Two Tiered Shared Rail - On the ground, flat roof, or pitched roof

Two to ten modules can be mounted in portrait mode.  Junction plates secure rails on both sides of interior rails. This configuration is an upgrade of our former U-DD. Complete information appears on page 15 of our the SolarMount Master Price List and Sizing Chart (1.3 MB). You can also download installation instructions