Specialists in Renewable Energy Products and Systems.  Tel: 0208 663 3273     Fax: 0208 650 9037     email: sales@brightgreenenergy.co.uk

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


   
 
Rutland

Wind Turbines, Chargers, Generators

and HRDX and HRS Regulators

 

Install a Rutland wind charger and experience the convenience of fully charged batteries. Power for land and marine based applications from the gentlest breeze.  Combine with solar panels for a balanced year round power supply. 
For more information about the combined wind and solar system click here...


For HRDX and HRS Controllers click here

 

RUTLAND 1803 Wind Turbine  
Are you living off grid?  Do you need power at a remote site?

Take advantage of the abundant power of the wind to generate your own free power using the Rutland FM1803 Furlmatic Windcharger.  

The FM1803 needs only a light breeze to start generating power for charging batteries so you have the convenience of energy stored for whenever you need it. 

Available in 12 volt or 24 volts.  The battery power can be used for:

 Low energy lighting 
 Pumps
 Refrigerators
 Telecommunications equipment
 Computers & TV’s
 230V appliances can be operated through an inverter

It's new aerodynamic proportions are designed to deliver maximum efficiency from its 1.8m diameter 2-bladed turbine. The FM1803 has a a new aerodynamic styling and the latest generator technology to deliver nearly 40% more power without increasing the turbine size. In fact the weight has been reduced, but the FM1803 is still as robust and "heavy duty" as its predecessor.

Click here or on the image for more details

NEW 3-Bladed version

 

Price: (inc vat) £1595.95

   
Rutland 910-3 Wind Turbine - Furlmatic  

The Rutland FM910-3 combines the established Furlmatic robust mechanical design with their latest 3 phase generator technology to deliver better performance and greater reliability than ever before. Primarily designed for land based applications, the Rutland FM910-3 has been used worldwide to provide year round power generation.

  • Furling tail system reduces speed in high winds.

  • Peaks up to 200W pre-furling.

  • Turbine diameter: 910mm

  • Weight: 15Kg

  • Packed Dimensions: 240 x 310 x 330mm

  • Packed Weight: 17Kg

An HRS913 or HRDX Controller is recommended for use with the Rutland FM910-3 Furlmatic.  For more information on the HRDX controllers and voltage regulators click here..

The Rutland FM910-3 - Generate your own electricity.  The perfect wind charger for off-grid and professional use.

Price: (inc vat) £554.95

Rutland 913 Wind Turbine  
Without doubt this latest model accumulates more energy than any other comparable wind generator available, you'll always see a Rutland spinning in the lightest of breezes! It's perfect for marine and land based applications.
  • Low wind speed start up of just 5 knots
  • Generates 90w @ 19 knots, 24w @ 10 knots and can deliver up to 300w
  • One way only fit fine profile efficient aerofoil blades
  • Three phase Rutland "unique" generator design
  • Automatic thermostat protection in prolonged gales
  • Modern, durable materials for reliability on the high seas
  • No radiated interference - complies with EEC directive 89/336/EEC 
  • Powerful, efficient, robust.
  • Ideal for cruising yachts and static caravans.
  • Generates up to 300W
  • Output: 7.5A @ 19 knots (12V system)
  • Turbine dial: 910mm
  • Weight: 10.5Kg

HRS913 or HRDX Regulator recommended. More Detail Here
Packed Dimensions: 375x375x620mm. Packed Weight: 13 Kg

Available in 12 or 24V versions
 

The Rutland 913 - Recommended BEST BUY for marine use

 

 

Price: (inc vat) £469.95

Rutland 503 Wind Turbine  

This latest model follows the success of its predecessor the Rutland 500 with a number of enhancements including performance and styling.

  • "Safety turbine" is a single injection moulding of 6 aerofoil blades protected by an outer ring.

  • Trickle charges in wind speeds as low as 5 Knots

  • Produces 25w in 19 Knots

  • Produces over 60w, nominally 5A @ 12V in 50 Knots

  • Stainless steel fasteners and marine grade materials

  • Turbine diameter of 500mm

  • Compact turning radius of just 225mm, great for when space is at a premium

  • Latest design improvements - the Rutland 503 is more reliable and efficient than ever!

  • No radiated interference - complies fully with BS EN5008-1 1992

Packed Dimensions: 550x550x260mm. Packed Weight: 6 Kg.

An HRS503 Regulator is recommended. Click here for more details

The Rutland 503 - Recommended by Practical Boat Owner as "Best Buy Trickle Charger"
 

Price: (inc vat) £287.95

 

Voltage Regulators and HRDX Controllers

Choose from two electronic regulators. Both models progressively slow down the turbine when the batteries become full thus reducing long term wear and tear to the turbine. Connect between the windcharger, plus solar panels, where fitted, and the battery to prevent overcharge.  Voltage regulation is pulse width modulation (PWM) type which slows the turbine down as the batteries become fully charged. All models are diode protected to allow charging from other sources to the same battery. Choose between the single bank HRS range or the HRDX Controller for twin battery banks.  You can check out our Charge Controllers here

Note: that voltage regulators should always be sited within 1.5m of the battery to minimise voltage losses and ensure accuracy of battery regulation.

HRS 503 & 913 Regulator

Single battery bank over Voltage regulation with LED indicators for charging status and battery voltage.
 

The Rutland HRS voltage regulator - slows down the turbine as batteries become fully charged.  Perfect for single battery use.

For use with Rutland 503 and FM913 and supports up to 100W of solar panels.
NOTE: A shunt diode (CA-11/01) must be installed to protect the solar panel when the HRS regulator is being used to connect both wind turbine and solar panel. The shunt diode protects the solar panel from the current produced by the wind turbine.
Specifications:

  • Led indicators show battery and charge status.

  • Flying lead connection

  • Dimensions: 150x75x34mm

  • Weight: 0.12Kg

HRS503 Regulator Price: (inc vat) £41.95

HRS 913 Regulator (12V OR 24V)
Price: (inc vat) £
61.95

HRDX Controller

Easy to use controller for charging up to 2 separate battery banks plus a solar panel input rated up to 100W. LCD displays charge currents and battery voltage readings. Shutdown switch.

The Rutland HRDX voltage controller - slows down the turbine as batteries become fully charged.  Perfect for twin battery use.

Simple combination of any one of Rutland 503, 913 or FM910 plus up to 100W of solar panels. NOTE: a separate shunt diode is not required when using the HRDX controller.

  • 5 Position switchable LCD

  • displays battery volts and charge currents.

  • Charge splitter for 2

  • battery banks.

  • Turbine / solar panel shutdown switch

  • Dimensions:157x137x59mm

  • Weight:0.85Kg

Select 12 or 24V voltage when ordering
 

HRDX Controller (12v or 24V) 
Price: (inc vat) £149.95 

RUTLAND ACCESSORIES AND PARTS

We sell all accessories and parts for Rutland wind turbines. If you're looking for mounting poles, towers, rigging, kits for marine use, controller, battery terminals and lots of other spare parts then CALL US.

BATTERIES

Deep cycle batteries should always be used for wind & solar charging. A good quality range of sealed AGM (absorbed glass matt) and gel batteries are available from Bright Green Energy. Check out our -> discover more here

CABLE & CONNECTORS

Cable thicknesses are determined by the run of cable distance. For cable runs up o 20m/60ft 2.5mm2 or13AWG cable is recommended to maximise electrical efficiencies. Permanent battery connectors are recommended.

SOLAR PANELS

Solar panels are a perfect complement to wind power, talk to WireFreeDirect about the BP Solar range of photovoltaic panels to give a seasonal balance of power to your system. Browse our range -> discover more here

CHARGE CONTROLLERS

Charge controllers from STECA, TAROM, SOLSUM and FOX are available. Check out what we offer discover more here

INVERTERS

Inverters convert battery power to 230V for appliances such as laptops, TV’s etc. Check out what's available -> discover more here

TRIED AND TESTED APPLICATIONS.  Remote Power, Off-Grid and Stand-Alone applications.

Tried & Tested applications for all uses.  Remote Telecommunications, Envirnmental monitoring, Navigation Lighting and Radio equipment etc.

  • Telecommunications at isolated location

  • Remote broadband connections

  • Roadside safety signs (see picture)

  • Environmental monitoring e.g. water, air etc.

  • Land based navigation lighting and radio equipment

  • These and many other applications where grid power is unavailable.


CALL US ON: 0208 663 3273

FOR FURTHER DETAILS

AND

NO OBLIGATION, FREE ADVICE

 

Bright Green Energy
26 Woodmere Way
Beckenham
BR3 6SL
Tel: 0208 663 3273

From overseas
Tel: +44 208 663 3273

Send us an email


FEBRUARY NEWS!

NEW: Read our Energy Blog

NEW: Solar Power Kits

NEW: Caravan & Motorhome Kits

Updated: Catalog

NEW: Off-Grid Solar and Wind Power Kit

Tel: 0208 663 3273



Wind Turbine and Solar Panel. Best combination to supply power to a remote system

Stand-Alone
(off-grid) Energy Systems designed and supplied

Click on image to see more

  


home  categories  search  checkout  contact  site map
 solar panels  wind turbines  rutland wind charger accessories  batteries  battery capacity
  battery sizing  sunny boy inverters windy boy inverters  off grid remote power system  inverters  inverter chargers  solar controllers and regulators solar mounting kits
 green column solar street lights  Solar LED Street Lights  Solar Hot Water Systems Marine Solar  Motorhome and Caravan Kits Solar Kits  
site survey