|
Inverter chargers combine and inverter and a battery
charger. They can be used with a solar PV array when another
there is another AC power source available, such as a diesel
generator. They can operate as uninterruptible power
supplies (UPS). In essence they offer all the features of an
inverter and charger in one compact enclosure. These intelligent
devices can behave either as an inverter or a charger and can switch
between one and other as required. Inverter-chargers can be
connected to the electricity grid, but they are not grid tied
inverters.
Our range of inverter chargers
include those from Victron, Studer and PowerMaster.
|
Victron |
Studer |
Power Master |
|
 |
 |
 |
|
Phoenix MultiPlus 12 / 24 /
48V |
Compact |
Combi SL series |
|
|
|
|
Phoenix MultiPlus Compact
12 / 24 Volt |
HP
Compact |
|
|
|
|
|
XP
Compact |
|
|
|
|
VICTRON
Phoenix MultiPlus 12 / 24 / 48 Volt
Phoenix MultiPlus Compact 12 / 24 Volt
All features of a sine wave inverter and charger
in one compact enclosure. UPS functionality: seamless transfer from
external AC to inverter supply.
A unique AC power management system will prevent overload of a
limited AC source. First, battery charging will automatically be
reduced when otherwise an overload would occur. The second level
will boost the output of a generator or shore side supply with power
taken from the battery: where peak power is often required only for
a limited period, the Phoenix MultiPlus will make sure that
insufficient shore or generator power is immediately compensated for
by power from the battery.
Models range from 800VA to 3000VA per module.
Scalable: any number of units can be paralleled in single phase,
split phase and three phase configuration.
POWERMASTER COMBI SL Series combines a powerful sine wave
inverter, sophisticated battery charger (with adaptive charge
technology), a solar panel regulator and high-speed AC transfer
switch all integrated into a single compact enclosure.
STUDER
Inverter chargers
with transfer relay, offer the possibility to charge batteries from
various sources of supply (electricity grid, solar generator...etc).
There are three types of
inverter in this range:
XP COMPACT
These consist of fully automatic pure sine wave
inverters with battery chargers and transfer systems. The XP
Compact series offers a pure sine wave inverter from 1100W to 1600W,
and a 4 stage fully automatic charger adjustable from 0-45A
- the inverter converts the battery voltage to
230Vac AC voltage
- the high power charger supplies charge current
to the battery
- the automatic transfer system manages the
available power
The XP COMPACT benefits from our
"one step ahead" technology in the field of inverters.
THE XP COMPACT SERIES OFFER:

- a high and steady efficiency
- an outstanding overload capability, thanks to
the combined use of a toroidal transformer and an oversized MOS
power stage
- an ultra-fast regulation and microprocessor
control
- an electrical supply to any kind of appliance
- a fast transfer relay
- a 4 STAGE (I/U/Uo/equalizing) battery charger
with Power Factor Correction (PFC)
- a potential free contact for alarm purpose if
the remote control is not used (default settings)
and programmable with the optional remote control RCC-01
- a complete internal protection of the
XP COMPACT (overload, overheat, short-circuit, reverse
polarity)
- an stand-by level adjustable on a large range
from a very low load detection
- no noise thanks to HF-switching > 20kHz
- battery cables mounted
- easy wall mounting by 4 external screws
-
OUTSTANDINGLY POWERFUL!
- The XP
COMPACT has been designed to stand overloads up to 40%
over its nominal power during 30 minutes.
The XP-Compacts in 12 and 24 V are
certified according to the norm ECE-R 10 (E24).
It is indeed
mandatory in all countries of the EU for appliances on board of
vehicles, to be cE certified.
Top of page
COMPACT range consist of fully automatic
pure sine wave inverter/battery charger/transfer systems.
The C Compact series
offers a pure sine wave inverter from 1300W to 3500W, and a 4 stage
fully automatic charger adjustable from 0-55A.
- the inverter converts your battery voltage to
AC voltage for all electrical devices
- the high power charger supplies charge current
to the battery
- the automatic transfer system manages the
available power
The COMPACT benefits from our long
experience in delivering a "one step ahead" technology.
THE COMPACT SERIES OFFER:
- a high and steady efficiency
- an outstanding overload capacity, thanks to the
combined use of a round transformer and a MOS power stage
- an ultra-fast regulation and microprocessor
controlled
- an electrical supply to any kind of device
- a fast transfer relay
- a 4 STAGE (I/U/Uo/equalizing) battery charger
with Power Factor Correction
- a complete internal protection of the
COMPACT (overload, overheat, short-circuit, reverse
polarity)
- an adjustable stand-by level on a large range
and from a very low level
- no noise thanks to HF-switching > 20 kHz
The Compacts in 12
and 24 V are certified according to the norm ECE-R 10 (E24).
It is indeed
mandatory in all countries of the EU, for appliances on board of
vehicles, to be E certified.
Top of page
HP COMPACT
series consist of fully automatic pure sine wave inverters/battery
chargers/ transfer systems. The HP Compact series offers a
pure sinewave inverter from 2500W to 7000W and a 4 stage fully
automatic charger adjustable from 0-110A
The HP COMPACT benefits from our
long experience in delivering a "one step ahead" technology.
THE HP COMPACT SERIES OFFER:
-
a high and steady efficiency
-
an outstanding overload capability, thanks to the
combined use of a toroidal transformer
and a MOS power stage
-
an ultra-fast regulation and microprocessor
controlled
-
an electrical supply to any kind of device
-
a fast transfer relay with following powers
30A/6,9kVA (50A/11,5kVA for the HPC 8000-48)
-
a 4 STAGE (I/U/Uo/equalizing) battery charger
with Power Factor Correction
-
a complete internal protection of the HP
COMPACT (overload, overheat, short-circuit)
-
an stand-by level adjustable on a large range and
from a low threshold on
- no noise thanks to HF-switching > 20 kHz
Top of page
|
Model |
Price |
Document Download |
|
Studer XPC Range |
|
XPC1400, 12V |
£835.00 |
BROCHURE
DATASHEET
MANUAL |
|
XPC2200-24V |
£880.00 |
|
XPC2200-48V |
£930.00 |
|
Studer Compact Range |
|
C1600-12V |
£1,155.95 |
DATASHEET
MANUAL |
|
C2600-24V |
£1,310.00 |
|
C4000-48V |
£1,800.00 |
|
Studer HP Range |
|
HPC2800-12V |
£1,845.00 |
BROCHURE
DATASHEET
MANUAL |
|
HPC4400-24 |
£2,325.00 |
|
HPC6000-48 |
£2,700.00 |
|
HPC8000-48 |
£3,350.00 |
| |
|
|
top of page
Call us on
0208 663 3273
|